The application of synchronous belt in the field of mechanical automation can be said to be very common, and the synchronous belt is divided into rubber synchronous belt and polyurethane synchronous belt two, today Aimai will give you some introduction of rubber synchronous belt.

The rubber synchronous belt is made of high quality neoprene as the main raw material, and then mixed with various auxiliary materials for different purposes.The skeleton material is imported high-quality glass fiber cord;The tooth surface is protected by nylon 66 high elastic cloth.

The rubber synchronous belt has the characteristics of good dynamic flexion and winding, good resistance to cracking, good ozone performance, aging resistance, heat resistance, oil resistance and abrasion resistance.And neoprene synchronous belt is also widely used in textile, automotive, chemical fiber, cigarette, paper, printing, chemical and other mechanical equipment.

Common specification of rubber synchronous belt

1. Ladder teeth :MXL, XL, L, H, XH, XXH

2. Double-sided ladder teeth: DXL, DL, DH

3. Semi-circular tooth: HTS(HTD) type

(1) 3M, 5M, 8M, 14M, 20M

(2) Double-sided teeth: D3M, D5M, D8M, D14M

4. Wedge teeth: STS

(1) S2M, S3M, s4.5m, S5M, S8M, S14M

(2) Double-sided teeth: ds4.5m, DS8M, DS14M

5. Tooth peak concave type: RPP(low noise type, replaceable type HTD)

(1) P3M, P5M, P8M and P14M

(2) Double-sided teeth: DP5M, DP8M and DP14M