In order to better meet the needs of industrial enterprises for the production process of conveyor equipment bottle screw. Conveyor manufacturers can also design and combine the production conveying lines of the bottle feeding screws of the mesh belt conveying equipment according to the technological requirements of the production enterprises.

According to the different products produced in various production industries and the needs of the production process, the bottle feeding screw of the mesh belt conveying assembly line can select various forms of combined conveying methods, and can also select multi-unit combined horizontal or inclined conveying systems to produce and convey products.

Conveyor belt of turning machine

Conveyor turning device is same as other equipment, monthly maintenance is necessary.

1. The belt shall be regularly unwound by the conveyor, and the abnormal roller in contact with the belt shall be inspected to see whether the roll is flexible and reliable. If the abnormal roller is not flexible, it shall be removed and replaced in time to ensure the normal operation of the device and prevent the belt from wearing.The replacement method of the deformed roller is to unscrew the top wire on the shaft seat at both ends of the steering roller, rotate the steering roller, replace the deformed roller, and finally tighten the top wire on the shaft seat.

2. The conveyor shall check whether the bolts at the joints are loose regularly, and tighten them in time if they are loose.

3. During the operation of the conveyor, a part of the deformed roller which is not in contact with the rubber belt on the steering roller can be removed to facilitate the drainage and the replacement of the deformed roller.Attention: when the equipment is running, the top wire on the axle seat at both ends of the steering drum must be firm!

4. The conveyor regularly unscrews the screw plug at the end of the shaft of the steering drum to inject butter, so as to ensure the lubrication of the bearing and extend the service life of the drum.

5. During the use of the conveyor, coal and coal slime should be promptly cleaned between the rollers to prevent the rollers from getting stuck in each other and wearing the belt.Pressure wind should be used.Do not use the water pipe rinse, if the water into the abnormal roller will shorten the service life of the rolling conveyor line application range

6. The conveyor shall rotate the steering roller 60 degrees every week to ensure smooth operation.When adjusting, loosen the top wire on the axle seat at both ends. After the adjustment, close the top wire.

Aimai team on on the Fair

Transportation equipment is the material basis of the logistics system. With the development and progress of logistics, logistics equipment has been continuously upgraded and developed.Many new equipment in the field of logistics equipment, such as four to the tray, elevated forklift, automatic sorting machine, automatic guided carrier (AGV), container, etc., greatly reduce the labor intensity of people, improve the logistics operation efficiency and service quality, reduces the logistics cost, play an important role in the logistics operation, greatly promoted the rapid development of logistics.In turn, the rapid development of logistics industry has put forward higher requirements for logistics equipment.

Application range of rolling conveyor line

Selection style of conveyor line:

When the conveyor is working, its length can be stepless adjusted by the control button.

Conveyor height and belt width can be selected according to the above table.

The conveyor belt conveying speed can be fixed or variable speed.

The expansion and contraction speed of the conveyor telescopic joint can be fixed or variable speed.

The slope Angle of the conveyor can be climbed or lowered.

Conveyor transport direction can choose one-way or two-way.

The conveyor can be fixed or movable.

Conveyor belt can choose chemical fiber belt or reinforced PVC belt, oil - resistant, wear - resistant, anti - cutting.

The logistics transportation line can accurately transport from one location to another in the production site with the best route and the fastest speed to complete the space-time transfer of the production materials and ensure the coordinated production of various products and rapid changes as required.

Conveying equipment is a very important category in food assembly line products and occupies a large market in enterprise production. Transportation equipment is classified according to different application industries and products, such as electronic product transportation lines and food transportation lines. There are many different classifications according to the different conveying carriers, such as belt conveying lines, double-speed chain conveying lines, roller conveying lines, etc. Among the numerous conveying equipment, the food conveying line is a professional production equipment for food processing. Food conveying line is mainly used for automatic or semi-automatic assembly line production equipment of food processing and production enterprises, and is mainly used for transporting food raw materials or finished products in production. Food conveying lines are also called food conveyors, which have belts, chain plates, mesh belts, stainless steel belts, climbing hills, cleaning, etc.

Conveyors play an important role in modern cargo or material handling systems. It is not only an indispensable component of mechanized, continuous and automated flow-line transportation lines, but also the lifeline of automated warehouses, distribution centers and large freight yards.

Classification of conveying machinery:

The form, structure and working principle of conveying machinery are varied. They can be divided into fixed conveying machinery and mobile conveying machinery according to their different installation modes. According to their transmission characteristics, they can be divided into flexible traction component conveyor washing and non-flexible traction component conveying machinery. According to their structure, they can be divided into roller type, chain type, wheel type, adhesive tape type, slide plate type and suspension type.

Application Scope of Rolling Conveyor Line Conveying machines with flexible traction parts mainly use flexible traction parts such as belts to transmit power, including belt conveyors, plate conveyors, scraper conveyors, buried scraper conveyor, bucket elevators, suspension conveyors, etc. Conveying machines without flexible traction parts rely on working mechanisms to directly push materials to move, mainly by screw conveyors, roller conveyors, vibrating conveyors, etc.