High temperature resistant conveyor belt in normal use, it is hard to avoid the phenomenon of rupture, swelling, running off, etc., so in the face of these phenomena, what kind of preventive measures should we have?The following is a brief explanation by Aimai.

Through the analysis of the wear factor of the conveyor belt, the corresponding preventive measures are taken in the design of the belt conveyor to prolong the life of the conveyor belt.Generally, the following 5 preventive measures are adopted to optimize the design to reduce the wear of conveyor belt:

1. Reasonable selection of PU conveyor belt;

2. Reduce the wear of conveyor parts on the conveyor belt;

3. Structure optimization of feeding device;

4. Reduce the impact of feeding process on conveyor belt;

5. Use electromechanical protection.

In addition, from the reason to prevent PU conveyor belt running deviation also can be regarded as a good way. Conveyor belt running deviation is the main cause of conveyor belt edge wear, therefore, on the basis of the original frame every 10 clip two running deviation prevention device, the conveyor belt of corrected automatically, this method is simple and easy to operate, but the effect is very good.