Aimai industrial belt explains the bonding method of light conveyor belt for youAre all light conveyor belts bonded in the same way?Is there any difference between the connection method and the heavy conveyor belt?Conveyor belt factory for you to explain the light conveyor belt bonding method.

When the factory cut the PVC green conveyor belt, before the ring, it is necessary to bond the two ends of the belt, so as to achieve a flat ring PVC.

1. Tooth punching before bonding

PVC green light conveyor belt under 3mm into a single tooth, over 3mm into double teeth.

2. Vulcanization in bonding

Connect the toothed conveyor belt with a hot air gun to the teeth on both sides, then put into the vulcanization machine.Each type of vulcanizing machine corresponding to the thickness of the belt, the length of the width is not the same, the selection of the vulcanizing machine are also different, including: water cooling vulcanizing machine (half an hour to connect, cooling 3-5 minutes), air cooling vulcanizing machine (5 minutes to connect, 5 minutes to cool), high-frequency joints (30 seconds to connect, 30 seconds to cool).

With the increase of the roller rotation speed, the PVC conveyor belt transverse velocity line increases, therefore, in order to make the PVC conveyor belt running off the normal track as soon as possible, should make the roller rotation flexible. When the rotation speed of the idler is 0, the lateral speed of the conveyor belt is 0, that is, the conveyor belt does not move along the lateral direction, that is, when the idler does not rotate, the conveyor belt in front of the idler will not automatically return to the normal running track, so that the idler in front of the idler also cannot achieve the purpose of rectifying deviation.

With the increase of the front offset Angle of the idler, the transverse velocity of PVC conveyor belt increases linearly. Therefore, in order to make the deviated conveyor belt return to the normal track as soon as possible, the front offset Angle of the idler should be increased.

The transverse speed of PVC conveyor belt changes exponentially with the speed of the conveyor belt relative to the roller. When the speed of the conveyor belt relative to the roller is greater than 3m/s, the transverse speed of the conveyor belt tends to be constant.